This SAR Standard Pulley size is the most common and as a standard single pulley can be used in all situations with knowledge and experience. It is the ideal pulley to be in the kit of a rescue team or access team.
•Material: High Grade ALLOY.
•Strength: 36kN.
•Standard: EN 12278.
•Sheath size: 50mm dia, down to 38mm dia.
•Side Plate Size: Height 85mm. Width 50mm.
•Rope Size: Max. 12.7mm.
•Weight: Single 168grms.
The Double Pulley of this set is mainly used in systems that are pre rigged or as traveler pulleys along twin line cable-ways and Tyrolean’s. It is specific in its use and therefore should be in a kit that the team members know what is required of it.
•Material: High Grade ALLOY.
•Strength: 36kN.
•Standard: EN 12278.
•Sheath size: 50mm dia, down to 38mm dia.
•Side Plate Size: Height 75mm. Width 50mm.
•Centre Plate length: 100mm.
•Rope Size: Max. 12.7mm.
•Weight: 288grms.
.The Single Double Ended Connection Pulley is used in systems along with the double pulley, but it is also used in specialist techniques for lowering lines within Tyrolean type rescue systems. It can be used for all the same uses as the standard single with a few extra where there is a requirement for the twin connections.
Material: High Grade ALLOY.
•Strength: 30kN.
•Standard: EN12278.
•Sheath size: 50mm dia. down to 38mm dia.
•Side Plate Size: Height 150mm.
Width 50mm.
•Rope Size: Max. 12.7mm.
•Weight: Single 100grms.
•Bag size: 40cm long x 20cm dia.