• HOME
  • ABOUT US
  • YOUR INDUSTRY
    • Forestry
    • Construction & Civil Works
    • Shipping & Marine
    • Civil & General Engineering
    • Oil Rig & Mining Supplies
    • Agriculture & Transport
    • Commercial Fishing
  • FORESTRY PRODUCTS
    • Logging Rope
    • Blocks
    • Loggers Rigging Equipment
    • Loggers Equipment
    • Log Marka
    • Oregon Chainsaw & Harvester
    • Forestry Safety Signs
    • ACME
    • Ecotracks
    • Fortronics
    • Loadboss Tension Monitors
    • Trackgrip
    • Babac Skidder Chains
    • Used Equipment
  • GENERAL PRODUCTS
    • Wire Rope
    • Wire Rope Fittings
    • Wire Rope Accessories
    • Shackles
    • Blocks
    • Chain & Fittings
    • Synthetic Lifting Slings
    • Lever & Chain Blocks
    • Load Restraint
  • RESOURCES
    • Resources Directory
    • Image Gallery
    • Videos
    • Technical Guides
    • Links
    • Shaw's Material
    • News
    • Phoenix Lubricant Guide
  • CONTACT

Wire Rope Fittings

  • Wire Rope Clips

  • Thimbles

  • Turnbuckles & Rigging Screws

  • Sockets

green pin logoWire Rope Clips

  Wire Rope Clips Type A to EN 13411 - 5  Material: Bridge - malleable steel. U Bolt - mild steel.  Standard: EN 13411 - 5 Type A (formerly DIN 1142)  Finish: Electro galvanised.   Wire Rope Clips Type A to EN 13411 - 5  Material: Bridge - malleable steel. U Bolt - mild steel.  Standard: EN 13411 - 5 Type A (formerly DIN 1142)  Finish: Electro galvanised.   Wire Rope Clips Type B to EN 13411 - 5  Material: Bridge - Drop forged high tensile steel SAE 1035 or SAE 1045.  Standard: EN 13411 - 5 Type B  Finish: Hot dipped galvanised .   Wire Rope Clips to DIN 741  Material: Bridge - casted; U Bolt - mild steel  Standard: DIN 741  Finish: Electro galvanised.
Back to top

green pin logoThimbles

  Standard Thimbles  Material: Mild Steel.  Standard: EN 13411 - 1 (formerly BS 464)  Finish: Hot dipped galvanised.   Thimbles: Heavy Duty Stub End  Material: Mild Steel.  Standard: n/a.  Finish: Electro galvanised.   Solid Thimbles  Material: Cast mild Steel (GTW 40)  Standard: DIN 3091  Finish: Self Coloured.   Tubular Thimbles  Material: Mild Steel.  Standard: n/a.  Finish: Painted.
Back to top

green pin logoTurnbuckles & Rigging Screws

  Turnbuckles: Eye - Jaw  Material: Drop forged high tensile steel  SAE 1035 or 1045  Safety Factor: MBL equals 5 x WLL.  Standard: ASTM F1145 - 92  (Formerly US Fed Spec FF - T - 791b).  Finish: Hot dipped galvanised.  Turnbuckles: Eye - Jaw  Material: Drop forged high tensile steel  SAE 1035 or 1045  Safety Factor: MBL equals 5 x WLL.  Standard: ASTM F1145 - 92  (Formerly US Fed Spec FF - T - 791b).  Finish: Hot dipped galvanised.   Closed Body Rigging Screws: Jaw - Jaw  Material: Mild Steel.  Safety Factor: MBL equals 5 x WLL.  Finish: Hot dipped galvanised (end fittings of 6 & 8 mm rigging screws are electro galvanised).   Closed Body Rigging Screws: Eye - Jaw  Material: Mild Steel.  Safety Factor: MBL equals 5 x WLL.  Finish: Hot dipped galvanised (end fittings of 6 & 8 mm rigging screws are electro galvanised).
Back to top

green pin logoSockets

 
Call to discuss your requirements today